Reverse Travel and Sag Indicator 2.0
- The "Travel and Sag INDICATOR" is a measuring instrument for racers and suspension tuners
- For easy set up of steel spring dampers
- The INDICATOR is mounted on the side and by means of a scale one can easily read off
how much travel was needed when driving
- Ideal for suspension "setup", to determine the correct spring stiffness, sag and preload.
- It's a tuning tool to find out if the spring rate is correct and how the compression / damping is adjusted
- To optimise your setup for racing or your new bike
- Weight: 40 g
- Material: aluminium / plastic
- Scope of delivery:
1x spring plate attachment
1x holder for the indicator
1x telescopic sleeve
1x telescopic scale
1x cable tie
1x Piggyback sticker
1x serrated lock washer M5
1x M5 screw
1x O-ring
Attention!!!
The Travel & SAG Indicator 2.0 is only compatible with springs that do not exceed a length of 180 mm, whether compressed or uncompressed.
If this is the case, we recommend version 1 (item no. 933000964) with attachment to the expansion tank.
If this is not possible due to the design, please contact our customer support and we will find an individual solution.
- For easy set up of steel spring dampers
- The INDICATOR is mounted on the side and by means of a scale one can easily read off
how much travel was needed when driving
- Ideal for suspension "setup", to determine the correct spring stiffness, sag and preload.
- It's a tuning tool to find out if the spring rate is correct and how the compression / damping is adjusted
- To optimise your setup for racing or your new bike
- Weight: 40 g
- Material: aluminium / plastic
- Scope of delivery:
1x spring plate attachment
1x holder for the indicator
1x telescopic sleeve
1x telescopic scale
1x cable tie
1x Piggyback sticker
1x serrated lock washer M5
1x M5 screw
1x O-ring
Attention!!!
The Travel & SAG Indicator 2.0 is only compatible with springs that do not exceed a length of 180 mm, whether compressed or uncompressed.
If this is the case, we recommend version 1 (item no. 933000964) with attachment to the expansion tank.
If this is not possible due to the design, please contact our customer support and we will find an individual solution.
| Scope of application: | MTB |
| Packaging (LxWxH in cm): |
16,8 x 8,3 x 2,0 |
| Gross weight (kg): | 0,039 |
$37.95
Reverse Travel and Sag Indicator 2.0—
$37.95
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- The "Travel and Sag INDICATOR" is a measuring instrument for racers and suspension tuners
- For easy set up of steel spring dampers
- The INDICATOR is mounted on the side and by means of a scale one can easily read off
how much travel was needed when driving
- Ideal for suspension "setup", to determine the correct spring stiffness, sag and preload.
- It's a tuning tool to find out if the spring rate is correct and how the compression / damping is adjusted
- To optimise your setup for racing or your new bike
- Weight: 40 g
- Material: aluminium / plastic
- Scope of delivery:
1x spring plate attachment
1x holder for the indicator
1x telescopic sleeve
1x telescopic scale
1x cable tie
1x Piggyback sticker
1x serrated lock washer M5
1x M5 screw
1x O-ring
Attention!!!
The Travel & SAG Indicator 2.0 is only compatible with springs that do not exceed a length of 180 mm, whether compressed or uncompressed.
If this is the case, we recommend version 1 (item no. 933000964) with attachment to the expansion tank.
If this is not possible due to the design, please contact our customer support and we will find an individual solution.
- For easy set up of steel spring dampers
- The INDICATOR is mounted on the side and by means of a scale one can easily read off
how much travel was needed when driving
- Ideal for suspension "setup", to determine the correct spring stiffness, sag and preload.
- It's a tuning tool to find out if the spring rate is correct and how the compression / damping is adjusted
- To optimise your setup for racing or your new bike
- Weight: 40 g
- Material: aluminium / plastic
- Scope of delivery:
1x spring plate attachment
1x holder for the indicator
1x telescopic sleeve
1x telescopic scale
1x cable tie
1x Piggyback sticker
1x serrated lock washer M5
1x M5 screw
1x O-ring
Attention!!!
The Travel & SAG Indicator 2.0 is only compatible with springs that do not exceed a length of 180 mm, whether compressed or uncompressed.
If this is the case, we recommend version 1 (item no. 933000964) with attachment to the expansion tank.
If this is not possible due to the design, please contact our customer support and we will find an individual solution.
| Scope of application: | MTB |
| Packaging (LxWxH in cm): |
16,8 x 8,3 x 2,0 |
| Gross weight (kg): | 0,039 |
